high strength,long life of the Hypoid Gear Motor

Hypoid Gear Motor uses hypoid gear design and performance.  Both worm gear and bevel gear types have low noise and high efficiency. Hypoid gears have been advanced by the special steel processing technology and carburizing hardening process.  Its strength and life is far greater than the worm gear.
Hypoid speed gearbox used in the design of high-strength box along with increased gear shaft axis drive and high-precision bearing load capacity will give you torque requirements necessary for more demanding applications.

vertical gear reducer assure reliable operation

vertical gear reducer energy is transmitted from a power source to a terminal point, through gears that change speeds, irections, and torque. Gear lubricants of the variable gearbox are formulated and applied to prevent premature component failure, assure reliable operation, reduce operating cost, and increase service life.

most specifications of the High Power Gearbox

High Power Gearbox designed for standard and straightforward uses, the motors can be modified to meet most specifications. Built to the highest manufacturing standards, the General Purpose Motors use the best materials sourced from around the world.
All units of the variable gearbox test run for 30 minutes prior to final quality control checks
Full traceability guaranteed with unique Challenege serial nuumber
Backstops also available
Held ex-stock in most Challenge waregiyse locations

hypoid gearbox can dimension

hypoid gearbox can dimension, specify and install the correct motor for any application, as well as provide repairs, preventive maintenance, full thermal imaging service, motor management advice and energy audits.
industrial gearbox manufacturers offer all gears are ground
Final heat tratment includes gas carburising to a depth of 1mm then grinding to DIN class 6
Castings crack tested

Wuma mounted reducer with consistent quality

Wuma mounted reducer can supply motors up to 45 kW off-the-shelf and up to 400 kW electric motors within four days.

The vertical gear box Includes complete torque arm assembly
Fully interchangeable with other manufacturers
Production line manufacturing guarantees tolerances and consistent quality
Gears produced on German manufactured hobbing centres to achieve the highest quality helical gear components

vertical gear reducer delivers performance

vertical gear reducer are interchangable with most Fenner type gearboxes. The Challenge Shaft Mounted Speed Reducer delivers performance in the harshest of applications. Shaft mounted of the variable gearbox drves remove the need for coupling mounting plinths and have virtually infinitely variable ratios due to the belt drive. They are also incredbly simple to fit.

variable gear motor with a conventional automatic

variable gear motor to give a wide range of ratios and a smooth transition between them. In automotive applications, some CVTs use a fluid-filled torque converter (as with a conventional automatic) to transfer power from the engine to the transmission, others a clutch similar to that used for a variable speed transmission, but with automatic activation (there is no clutch pedal).

Wuma hollow shaft gearbox descriptions

Wuma variable gearbox does upmost to meet or exceed the customers' expectation continually and manufactures the high quality products.
hollow shaft gearbox descriptions:
1). ISO9001, ISO14001 and CE certification.
2). Foot or flange mounted.
3). Input flange is IEC or NEMA standard input.
4). Dimension same with SEW.
5). Compact design, small volume, strong torque.
6). High efficiency, low energy consumption, small vibration, and low noise.