helical bevel worm gearmotor when installing and lubrication should be how to deal with helical gear reducer having six basic installation form, as novel reduction gear. Using optimization module combination system of advanced design, with small size, light weight, transmission torque, smooth start, the drive level the score fine and other properties, can choose any connection and a variety of mounting positions according to user requirements. Here we will explain in detail
Helical gear reducer when installing and lubrication should be how to deal with?
First, install
1, the gear reducer general inclination to be installed in the horizontal plane must not exceed 10 °.
2, when the input shaft and the output shaft is coupled with the power and ancillary machinery, as with coupling connection is required shafts and strictly in the heart of the phenomenon can not have a different use of V-belts and chains should not be too tight or too loose.
3, installed base should be solid and reliable, without vibration, loosening fixing screws should be strictly in accordance with the relevant standards and regulations to use.
4, the mounting screws should be tightened from time to time to check whether, stable fixation, the gasket try to use spring washer.
Second, lubricating
1, gear reducer commonly used sump lubrication, note must be added before use good extreme pressure gear oil N220 or N320 to a predetermined position (the lowest portion of the tooth 20-30mm), and regularly serviced.
2, the first 50 hours, should be immediately replaced with new oil and clean the oil inside the body, after completely replaced once every three months.
3, seal leak your own replaced soon.