Methods to ensure the normal operation of the gear reducer

1, to ensure the quality of assembly. Some time can be purchased or homemade special tools to remove and install the gear reducer parts, try to avoid tapping with a hammer and other tools; replace the gear, when worm, try to use original parts and be replaced in pairs; assembly output shaft to Note tolerances; to use anti-adhesive or red lead oil to protect the hollow shaft, with the area to prevent rust or dirt wear, difficult disassembly maintenance.
2, the selection of lubricants and additives. combined worm reducer 220 # gear oil is generally used for heavy-duty, start frequently, poor use of the environment reducer, can use some lubricant additives, so that when you stop running gear gear oil is still attached to the gear surface, forming a protective film direct contact between metals at preventing heavy load, low speed, high torque and starts. Additives containing ring modulators and anti-leak agent, the seal ring remains soft and flexible, effective reduce oil leakage.
3, gear reducer installation location options. Lower position permitting, try not to use vertical installation. When vertical installation, the installation a lot more than the amount of the lubricating oil level, could easily lead to fever reducer and oil spills.
4, the establishment of lubrication maintenance of the system. According lubrication "five" Principles of gear for maintenance, so that each person has a responsibility reducer regularly checked and found significant temperature exceeds 40 ℃ or oil temperature exceeds 80 ℃, the quality of oil drops or oil found more copper and generating unusual noise and other phenomena, should immediately stop using and timely maintenance, troubleshooting, replacement of oil. When refueling, pay attention to oil, to ensure correct lubrication of gear.